eDIN #1009 DMX/RDM Opto-splitters provide full isolation between ports and RDM-compatibility.

 eDIN #1009 DMX/RDM Splitter

The eDIN #1009 is a DIN-rail mountable four-way opto-splitter that supports the bi-directional communication standard E1.20 Remote Device Management (“RDM”), as well as DMX512.  Used in installations that require ‘star’ wiring configurations, all output ports are separate electrical entities, fully opto-isolated and independently protected against fault voltages.

  • One DMX512 /RDM input port
  • Four fully isolated DMX512/RDM bi-directional output ports
  • One active DMX512/RDM bi-directional thru port
  • Pluggable terminal  blocks for all connectors
  • Power and data easily daisy-chained between modules
  • DMX IN indicator
  • DC Power input indicator
  • ISO 5V indicator
  • Auto-termination of DMX THRU
  • No fuses— self-resetting port protection recovers from voltage faults
  • 2500V opto-isolation between input and output ports
  • 250V fault protection on input and output ports
  • Input operating voltage: 9-30 VDC
  • 6W power consumption
  • Operating conditions: -10° to +50°C; 10-90% relative humidity, non-condensing
  • ANSI E1.11 DMX512-A(2008)/USITT DMX512(1990)
  • ANSI E1.20 RDM(2010) - Remote Device Management
  • RoHS 2002/95/EC
  • Class 2 Low Voltage
  • 0.70 lbs (0.316 kg)
  • 3.6”W x 6.25”L x 1.5”H  (91mm x 160mm x 38mm)

Model

Description

1009

eDIN DMX/RDM Splitter, 4-Way

For pre-assembled, contractor friendly installation repeaters based on the #1009 interface, order from the following part numbers:

4813

eDIN DMX/RDM Installation Repeater, 4-way,
c/w power supply, internally pre-wired, ETL-listed

4814

eDIN DMX/RDM Installation Repeater, 8-way,
c/w power supply, internally pre-wired, ETL-listed

4815

eDIN DMX/RDM Installation Repeater, 12-way,
c/w power supply, internally pre-wired, ETL-listed

Accessories

1001-30

DIN-mountable 24VDC 30W power supply

1103

Rack-mount Panel Kit (2RU) with
two 16.5” (420mm) sections of DIN rail

1105

Small eDIN Enclosure (NEMA1) with
9.5” (240mm) of  vertical DIN rail

1106

Large eDIN Enclosure (NEMA1) with
19.5” (495mm) of vertical DIN rail

1107

Large eDIN Enclosure (NEMA1) with
three rows of 9.5” (240mm) horizontal DIN rail

4000

eDIN Enclosure Assembly Service