eDIN #1002 Opto-splitters feature one isolated input and four buffered outputs.

 eDIN #1002

An essential part of any permanent DMX512 distribution system, the DIN-rail mountable eDIN #1002 enables ‘star’ wiring configurations of DMX512 data lines.  Each buffered output is isolated from the DMX input and protects all connected end-devices from harmful electrical faults and ground loops.

  • One DMX512 input
  • Four buffered DMX512 outputs
  • One passive  DMX512 thru connector
  • Pluggable terminal  blocks for all connectors
  • Power and data easily daisy-chained between modules
  • DMX IN indicator
  • DC Power input indicator
  • ISO 5V indicator
  • Termination switch
  • No fuses— self-resetting port protection recovers from voltage faults
  • DIN rail mounting section included
  • 1500V opto-isolation between input and output ports
  • 250V fault protection on input and output ports
  • Input operating voltage: 9-30 VDC
  • 5W power consumption
  • Operating conditions: -10 to +50°C; 10-90% relative humidity, non-condensing
  • ANSI E1.11 DMX512-A(2008)/USITT DMX512(1990)
  • RoHS 2002/95/EC
  • Class 2 Low Voltage
  • 0.50 lbs (0.26 kg)
  • 3.6”W x 4.5”L x 1.5”H  (91mm x 115mm x 38mm)

Model

Description

1002

eDIN Opto-Splitter, 4-Way

For pre-assembled, contractor-friendly installation repeaters based on the #1002 interface, please order from the following part numbers:

4807

eDIN Installation Repeater, 4-way, c/w power supply,
internally pre-wired, ETL-listed

4808

eDIN Installation Repeater, 8-way, c/w power supply,
internally pre-wired, ETL-listed

4809

eDIN Installation Repeater, 12-way, c/w power supply,
internally pre-wired, ETL-listed

4810

eDIN Installation Repeater, 16-way, c/w power supply,
internally pre-wired, ETL-listed

Accessories

1001-30

DIN-mountable 24VDC 30W power supply

1103

Rack-mount Panel Kit (2RU) with
two 16.5” (420mm) sections of DIN rail

1105

Small eDIN Enclosure (NEMA1) with
9.5” (240mm) of  vertical DIN rail

1106

Large eDIN Enclosure (NEMA1) wit
19.5” (495mm) of vertical DIN rail

1107

Large eDIN Enclosure (NEMA1) with
three rows of 9.5” (240mm) horizontal DIN rail

4000

eDIN Enclosure Assembly Service